中文

Your location:Home>News>
Lay out Information to be provided

Lay out Information to be provided

Pubtime:2018/01/12
Lay out Information to be provided   (1) circuit diagram: Board only frame and pad can be omitted (2) bill of materials (BOM): must be provided (3) Organization Chart: It must be provided Drawing acceptable Protel Autocad, Power point, Jpg, Text file ...
More> >>
Copy board tools and capabilities

Copy board tools and capabilities

Pubtime:2018/01/04
Copy board tools and capabilities PCB copy board that is in the case of existing PCB circuit board cloning, prototype production, replacement parts, BOM production list, export the schematic Copy board tools scanner software Protel 99SE Pads 2007 Au...
More> >>
Proofing

Proofing

Pubtime:2018/02/24
2009-3-1 To March 1, 2009 to April 30, 2009, the company launched the following proofing proofing, Note: line width / line spacing to be 5 / 5MIL more than 0.3MM aperture size no other special Requires no BGA plug hole.
More> >>
Delivery method of calculation

Delivery method of calculation

Pubtime:2018/01/04
All orders delivery method of calculation: All delivery on weekdays (Sunday, national holidays) is not included Order after 16:00 the same day, delivery from the next day began to calculate.
More> >>
Confidentiality agreement template

Confidentiality agreement template

Pubtime:2018/01/04
Confidentiality agreement The company is located in: Party A: Shenzhen Kai new Albert CHAN Electronics Co., Ltd. Party B:   Both parties to the contract should follow the following principles: 1. Information to be kept confidential 1.1 All the parties mentioned in this Co...
More> >>
Pricing considerations

Pricing considerations

Pubtime:2018/01/04
Sales tax 1, an increase of 6% (VAT, low deduction 3%) The sales price is the sum of 'Subtotal' plus 'Sales Tax' 2, 17% value added (VAT, can deduct 17%) The sales price is the sum of 'Subtotal' plus 'Sales Tax' Shipping costs When the total price of goods...
More> >>
Order common problems

Order common problems

Pubtime:2018/01/10
System board and offer information to be provided 1 GERBER or PCB file 2 materials, quantity requirements and surface treatment, other special requirements 3 development must provide the development of functional specifications 4 copy board to provide two sets of original copy board 5 decryption I...
More> >>
System board common problems

System board common problems

Pubtime:2018/01/04
Surface treatment of the minimum molding size   Silver, tin, Entek molding the following minimum size: Silver 90 * 55mm Tin 100 * 150mm Entek 90 * 55mm Surface treatment such as one of the above, the single-chip size, smaller than the corresponding size, we will typeset ship...
More> >>
F

F

Pubtime:2018/03/13
More> >>
A

A

Pubtime:2018/03/13
More> >>